The ribbon should be placed upside down but the print should be facing you. The names should be on right and the date on left.

Loop the right side over the left side. This makes a unity bow.

Begin to pull the top of the unity bow down.

Pull the unity bow down to the point where the bow crosses.

Your bow is almost complete. We use a Kangaro HP-10 stapler with size #10 staples to hold the bow in place, but you can use wire or glue as well.

Now use a good stapler, pliable wire or a strong adhesive to hold the bow in place. You can purchase these items from your local craft or hardware store.